Drum unloader RobaDrum 200 for high melting capacity

Large selection of pumps and melting plates. This allows your drum unloader to be optimally configured for your production process.
Little adhesive residue. This saves you costs and protects the environment.
Easy drum unloader operation via touchscreen with graphical user interface.
Due to the robust FEP coating, you can clean the melting plates easily and quickly.
Choose the Tandem or Quattro variant so that your production continues without interruption when you change drums.
Straightforward system integration thanks to standardized fieldbus systems or open interfaces for direct component control.

The thermal conductivity of the adhesive used and the desired melting capacity define the melting plate suitable for your process. RobaDrum 200 offers flat and ribbed melting plates for EVA, PSA, and PUR adhesives. Butyl is melted using a ribbed melting plate specially developed for sealants

All melting plates are FEP-coated and therefore easy to clean. The optimized plate design reduces the amount of adhesive residue to a minimum - a pivotal detail to reduce your operating costs and protect the environment.

Whether you are a manufacturer in the converting, textile, wood, construction supply, automotive, or graphical industry, with RobaDrum 200 and a surface application head, you can coat and laminate a wide variety of materials uniformly and reliably. This is ensured by the numerous options and practical variants:

You select the desired gear pump from our range: From a low delivery rate with precise fine adjustment (0.7 kg/h*) to a high delivery rate (205 kg/h*) with quantity control.
Even highly viscous sealants, filled and abrasive adhesives are delivered reliably and in high quantities.
Integrated pattern control enables continuous and intermittent surface and bead application.
With the optional quantity control, you can easily achieve a uniform surface application, even at dynamic production speeds
You can operate RobaDrum 200 with two heated hoses and up to eight individually controlled application heads.
A powerful piston pump is available for processing butyl.
You can use RobaDrum 200 in Tandem or Quattro mode for continuous surface application

RobaDrum 200 is the perfect pre-melter for filling melter tanks or basins. Depending on your needs, select a suitable gear pump for a maximum delivery rate of up to 205 kg/h* (*dependent on adhesive, viscosity, and temperature). You can vary the required adhesive quantity quickly and easily at any time via the Robatech Control System.

If you are looking for continuous filling, we recommend running RobaDrum 200 in Tandem or Quattro mode. As soon as the level in the drum of the active system reaches the lower threshold, the controller automatically starts the preheating function for the redundant system and switches operation in time.

RobaDrum 200 offers standardized safety devices and accessories to increase the safety of your personnel during operation.

With the two-hand control, the operator activates the lifting cylinders to raise or lower the melting plate while remaining outside the danger zone.
When the melting plate is raised, the automatic drum ventilation is activated. The drum can be replaced in a controlled and safe manner.
The drum must be vented when lowering the melting plate. You can choose between manual or automatic venting.
An optional drum restraint is available for added safety and stability. It is attached to the front of the drum unloader and ensures that the drum remains in place when the melter plate is raised.
Do you want to avoid exposing your operating personnel to harmful adhesive vapors during drum changing? The optional extraction system is the ideal solution. It is connected to an existing venting system and requires a volume flow of 350 m3/h and a pressure difference of 450 Pa.

You can select additional optional system functions to optimize your adhesive process. Activation is convenient via software key without installation effort.