RobaPUR 2 MOD

Contact

Need more information?
Contact us:

Contact

RobaPUR 2 MOD

The RobaPUR 2 MOD adhesive adhesive melter is designed for processing different hot melt adhesives hot melt adhesives in block, granular, and cushion form. Particularly developed for demand-depending melting (Melt-on-Demand), it is suitable for processing almost all commercially available PUR adhesives as well as for PSA, EVA, and APAO hot melt adhesives.

The overall design of the RobaPUR 2 MOD is tailored to flexible production with short retrofit times. Switching between reactive and thermoplastic adhesives as well as color changes are quick and easy – without major cleaning effort. The innovative magazine and melting concept enables a significant increase in the melting rate to up to 10 kg/h. Depending on the pump selection, the adhesive melter can achieve delivery capacities of 9 – 12 kg/h. In highly dynamic processes (SpineCoat applications, adhesive binding in perfect binder soft covers 200 – 2000 T/h), up to 50 kg/h are possible.

  • Melt-on-Demand (MOD) technology ensures comprehensive protection of the adhesive characteristics of the melted material.
  • Processing of most commercially available PUR hot melt adhesives without additional inert gas flushing and active cooling.
  • Adhesive viscosities (depending on variant and pump type): 500 - 120,000 mPas
  • Adhesives with and without inliner
  • Self-calibrating level sensor for precise filling level monitoring
  • Consistent thermal separation between heating zones and magazine for high operating safety
  • Non-stuck coating for reduced and quick adhesive changes with different color (PUR applications in the woodworking industry)
  • TRM standard graphic panel for language-independent operation
  • Integrated AS IK 40 or AS IK 10 application control

The RobaPUR 2 MOD is available in three variants with different pump configurations. With that, the adhesive melter can be tailored optimally to customer- and process-specific requirements.

1-block magazine

The 1-block magazine is suitable for simple applications with low adhesive flow.

  • Magazine for 2...2.5 kg block.
  • Basin filling: Gerotor pump GPR 12, max. 9 kg/h, viscosities from 2,500 to 120,000 mPas
  • Nozzle application: Gear pump ZPR 12, max. 12 kg/h, viscosities from 500 to 120,000 mPas
  • For adhesives without inliner

2-block magazine

The 2-block magazine is recommended for applications with high adhesive flow. Compared to the 1-block magazine, significantly less refilling intervals are required and the process performance is improved with increased production due to higher magazine filling.

1-block magazine with press

The 1-block magazine with press is available for highly dynamic processes. It was specially developed for the use in clocked PUR applications of the bookbinding industry.

  • Magazine for 2...2.5 kg block.
  • Basin filling: Gerotor pump GPR 12, max. 9 kg/h, viscosities from 2,500 to 120,000 mPas
  • PUR spine nozzle application: Gear pump ZP3 S, max. 50 kg/h, viscosities from 500 to 10,000 mPas
  • For PUR hot melt adhesives with inliner

Thanks to the high melting rate and different configurations, the RobaPUR 2 MOD can be used in different applications and processes:

  • Packaging industry ISC 200
  • Graphical industry ISC 300
  • Textile industry ISC 590
  • Wood industry ISC 690
  • Construction supply industry ISC 790
  • Automotive industry ISC 820

Typical areas of application of the RobaPUR 2 MOD are basin filling, manual application using a hand applicator, as well as bead and surface application with nozzle systems.

Technical data

Container size Ø 120 up to 128 mm, height 160 to 200 mm
Melting capacity* max. 10 kg/h at 10,000 mPas (with 2-block magazine) with PUR adhesives
max. 8 kg/h at 100,000 mPas (with 2-block magazine) with PUR adhesives
max. 10 kg/h at 10,000 mPas (with 1-block magazine and press) with PUR adhesives
max. 10 kg/h at 65,000 mPas (with EVA granulate)
Number of delivery pumps 1
Gear pumps GPR 12 I ZPR 12 I ZP 3 (for PUR spine gluing process only)
Delivery volumes GPR 12: max. 9 kg/h I ZPR 12: max. 12 kg/h I ZP 3: max. 50 kg/h
Adhesive viscosity With GPR 12: 2,500 up to max. 120,000 mPa s
With ZPR 12: 500 up to max. 120,000 mPa s
With ZP 3: 500 to 10,000 mPa s (for PUR spine gluing process only)
Operating temperature 20 to 210 °C or 68 to 410 °F / accuracy ± 0.5 °C
Hydraulic heated hose connections 3 G½“ adhesive outlets or 2 G½“ adhesive outlets and 1 bursting screw
Supply voltage 230/400 V AC, 50 / 60Hz 3LNPE, 16 A standard Europe
400 V AC 50 / 60Hz 3LPE, 16 A, with neutral point generator
200-240 V AC, 3ØPE, 32 A, standard USA-JAPAN
Weight Approx. 80 kg
Compressed air supply min. 5 bar, oil-free air class 4 according to DIN ISO 8573-1

* Reference value, depends on adhesives and conditions

Share this product

About Robatech

Robatech with headquarters in Switzerland, is a worldwide leading manufacturer of high-quality application systems for industrial glue application. Our precise adhesive application equipment supports our customers in different industries in the efficient processing of hot melt adhesive and cold glue. As service and technology leader for green adhesive application solutions, we count on sustainability. Our products – manufactured partly using solar energy - are energy- and consumption-optimized and thus reduce environmental pollution. Gluing technology. Global and close. We are present in 61 countries. Our Robatech representation in your country is looking forward to answering any questions you may have regarding your adhesive application.

Robatech AG
Pilatusring 10
5630 Muri
Schweiz

Telefon:
Fax:
E-Mail:
Web:

+41 56 675 77 00
+41 56 675 77 01
This email address is being protected from spambots. You need JavaScript enabled to view it.
www.robatech.ch

  • Facebook
  • Google+
  • LinkedIn
  • Xing
  • YouTube
  • Twitter