Accessories hotmelt

01 ConnectorCover
02 GranulateContainer
03 robafeed

Ideally aligned products for sustainable and safe adhesive application.

Robatech offers an optimally matches product portfolio for increased efficiency during hot melt adhesive processing. The functional accessories support consumption- and energy-optimized adhesive application and increase operator safety and reliability.

 

ConnectorCover

The touch protection ConnectorCover covers the heated hose bolting connections and ensures a safe and energy-optimized production.

The ConnectorCover (as part of the GreenLine family) protects the operator against burns on contact and reduces heat radiation at the joints.

  • Suitable for NW6- and NW8-series heated hoses.
  • Design versions: 0º straight, 45º angled, 90º angled.
Infrared Sensor

The IR (Infrared Sensor) is an extremely sensitive method of detecting glue defects in hot melt adhesive.

  • Responds to radiated heat and generates a proportional analogue signal that is relayed to the pattern controller.
  • Compatible with all pattern controllers with AK in the code
EasyFix

The EasyFix hose mounts extend the life of heated hoses

EasyFix hose mounts maximize the life span of hot melt hoses and therefore reduce downtime. This easy way of hose routing keeps the cables and tubes off the floor, which prevents them from squeezing and crushing.

EasyFix is available in two different sizes to achieve an optimal fixing of our most common heated hoses NW 6, 8 and 13. The hose mounts can be installed with a standard screw M6 or a hanger. With a linking part you can bundle two or more hoses and make sure they are separated well to prevent overheating.

EasyFix advantages – at a glance

  • Increases life span of hoses and reduces parts costs – no squeezing, no crushing
  • Prevents overheating of bundled hoses and minimizes charring and nozzle blockages
  • Consistent hose temperature for high quality adhesive application
  • Increased uptime due to less system interruptions
  • Additional routing for solenoid cable and pneumatic tube
  • Increases operational safety
  • Thanks to the flexible design applicable for practically every application and environment
GlueFill

GlueFill – Granulate Container for Automatic Melter Filling

Granulate container GlueFill is an integral part of Robatech’s automatic filling system and is used in combination with granulate feeder RobaFeed 3. The filling system ensures safe and efficient melter filling with adhesive in granular form.

The GlueFill is responsible for granulate storage and delivery and is available in three sizes, allowing the refilling intervals to be reduced and efficiency to be increased depending on demand and application. Using the GlueFill model L and M, up to two melters can be filled at the same time. As large amounts of granulate tend to clump, a filling grid is available as an option for the GlueFill L. A vibrator plate is also available as an option. The current granulate filling level can be easily checked through a window on the front side of the container. To overcome longer distances from melter to GlueFill (> 10 m), a special distance amplifier for increased suction effect is available as an option for the transport hose.

Familiarize yourself with the detailed operating principle of automatic filling.

GlueFill Advantages – At a Glance

  • Safe filling without risk of burns
  • Increased line efficiency through maximum system availability
  • Time savings due to less refilling
  • Filling without adhesive contamination or clumping

Technical data:

Adhesive type Granulate and pastilles
Granulate size Max. Ø 12 mm
Pastille size 12 x 12 mm
Feed capacity* 4 kg per minute
Container sizes S: 10 liters, M: 50 liters, L: 100 liters
Suction unit S: 1 / M: 1 or 2 / L: 1 or 2
Feed distances Horizontal max. 7.5 m, vertical max. 2.5 m
Compressed air connection 6 bar, dry, cleaned, unoiled, G1/4” connection
Compressed air consumption at 6 bar 250 standard liters/min
Electrical connection Robatech systems: 24 Volt DC from the system

* Function and feed capacity depend on quality, size, shape, and stickiness of the adhesive

RobaFeed 3

RobaFeed 3 – Granulate Feeder for Automatic Melter Filling

Granulate feeder RobaFeed 3 is an integral part of Robatech’s automatic filling system and is used in combination with granulate container GlueFill. The filling system ensures safe and efficient melter filling with adhesive in granular form.

The RobaFeed 3 is the melter interface for filling and detects, when granulate must be refilled. The granulate feeder consists of a filling tube and air filter on the tank lid of the melter. As additional safety measure, an optional lock prevents tank opening by untrained personnel. The filling tube is connected to the granulate container GlueFill using a transport hose. Filling level monitoring of the adhesive tank controls the system and starts automatic filling. The RobaFeed 3 can be used on all Concept devices as well as on the JumboFlex.

Familiarize yourself with the detailed operating principle of automatic filling.

RobaFeed 3 Advantages – At a Glance

  • Safe filling without risk of burns
  • Increased line efficiency through maximum system availability
  • Constant adhesive temperatures as closed system
  • Tank lid allows easy maintenance access
  • Tank lid can be optionally secured using a padlock

Technical data:

Adhesive type Granulate and pastilles
Granulate size Max. Ø 12 mm
Pastille size 12 x 12 mm
Feed capacity* 4 kg per minute
Feed distancesHorizontal max. 7.5 m, vertical max. 2.5 m
Electrical connection Robatech systems: 24 Volt DC from the system

* Function and feed capacity depend on quality, size, shape, and stickiness of the adhesive

About Robatech

Robatech with headquarters in Switzerland, is a worldwide leading manufacturer of high-quality application systems for industrial glue application. Our precise adhesive application equipment supports our customers in different industries in the efficient processing of hot melt adhesive and cold glue. As service and technology leader for green adhesive application solutions, we count on sustainability. Our products – manufactured partly using solar energy - are energy- and consumption-optimized and thus reduce environmental pollution. Gluing technology. Global and close. We are present in 61 countries. Our Robatech representation in your country is looking forward to answering any questions you may have regarding your adhesive application.

Robatech USA Inc.
1005 Alderman Drive Ste 108
Alpharetta, GA 30005 USA


Phone:
Fax:
E-Mail:


+1 770 663 8380
+1 770 663 8381
This email address is being protected from spambots. You need JavaScript enabled to view it.


Click here for more US locations

  • Facebook
  • Google+
  • LinkedIn
  • Xing
  • YouTube
  • Twitter