Pallet stabilization with AntiSlip Gluing – cost-effective and environmentally friendly solution

Pallet stabilization with AntiSlip Gluing, a hot melt adhesive application directly onto the packaging units, saves resources and costs. This is different from the conventional method, where intermediate cardboard layers and external plastic foil layers add costs and increase the recycling effort.

A solution that meets today’s high requirements

Robatech Pallet stabilization palletizing

Goods palletizing has extensive risks and possible problems: Containers and packages must be transported increasingly faster and more efficient. Safety aspects are as essential as the failure rate caused by damage. Environmental aspects and country-specific regulations are becoming more important. With AntiSlip Gluing offered by Robatech, you can meet these challenges automatically.

Integration into the production process

Robatech Palettenstabilisierung Paletten Stabilisierung Palettierung

The AntiSlip Gluing solution can simply be integrated into the production process or retrofitted. Using a thin hot melt adhesive application in spiral or bead form on the top of the packaging, they become a safe and stable unit during stacking on a pallet. The AntiSlip Gluing solution can be positioned at the exit of the palletizing station, where two lines of hot melt adhesive are applied, or for the case packer, at the entry of the station, where several lanes with tracking units are glued at the same time and in parallel. The palletizing function with box counter, integrated into the Robatech pattern control, ensures that no adhesive is applied to the top layer of goods.

Sustainability in pallet stabilization thanks to optimized resources

Robatech Pallet stabilization palletizing

In general, the amount of adhesive applied is optimized to ensure that the packaging units stick together reliably. Intermediate layers of anti-slip gluing cardboard can largely be omitted. To secure on the pallet, no or just a little foil is required, e.g., as dust protection. On removal of the protective foil, unit stability and goods integrity is ensured thanks to AntiSlip Gluing.

Comparison with traditional palletizing

Process Traditional Method AntiSlip Gluing
Packing Many layers of foil required for stabilization and dust protection
Mostly anti-slip cardboard between the individual layers to increase stability
Little foil (dust protection) required thanks to bonding
Anti-slip cardboard can be largely omitted
Less packaging material = cost savings / environmentally friendly
Transport / storage Risk of goods shifting during transport and storage Safe transport and storage as no shifting/slipping possible due to bonding.
Safe transport = cost savings
Depalletizing On foil removal, individual packaging units may lose their stability or become damaged
Lots of foil waste
After foil removal, the packaging units are still stable
Reduced foil waste = cost savings / environmentally friendly

Advantages of AntiSlip Gluing at a glance

No Dmg 1
Good integrity and stability during transport and storage
Efficience 1
Increasing efficiency through integration into production process and safe operation
Savings 1
Reduced logistics and recycling costs
Climate 1
Adhesive is cost-efficient as well as humidity- and heat-resistant
No Waste 1
Simple depalletizing with little waste
Barcode 1
No concealing of goods, graphics, or barcodes
Law 1
Compliance with statutory regulation regarding plastic foils can be ensured

Where is this palletizing solution used?

Robatech Pallet stabilization palletizing

The system solution is suitable for plastic and paper materials as well as different container and packaging types (cardboard boxes, bags, foil-wrapped packs, multi boxes, etc.).
In the case of new systems, AntiSlip Gluing pallet stabilization can be directly integrated into the system and thus into the host by the machine builder. The solution can also be operated as option or retrofit independently from the host via the Robatech pattern control.

Benefits in real-life applications

Using AntiSlip Gluing, our customers could essentially:
Increase the packing speed by up to 50 %
Reduce external layers by 30 %
Reduce intermediate cardboard layers by up to 75 %
Prevent deformations on the pallet during transport

Some of our references successfully using the solution

Components of the AntiSlip solution


About Robatech

Robatech with headquarters in Switzerland, is a worldwide leading manufacturer of high-quality application systems for industrial glue application. Our precise adhesive application equipment supports our customers in different industries in the efficient processing of hot melt adhesive and cold glue. As service and technology leader for green adhesive application solutions, we count on sustainability. Our products – manufactured partly using solar energy - are energy- and consumption-optimized and thus reduce environmental pollution. Gluing technology. Global and close. We are present in 70 countries. Our Robatech representation in your country is looking forward to answering any questions you may have regarding your adhesive application.

Robatech USA Inc.
1005 Alderman Drive Ste 108
Alpharetta, GA 30005 USA


Phone:
Fax:
E-Mail:


+1 770 663 8380
+1 770 663 8381
This email address is being protected from spambots. You need JavaScript enabled to view it.


Click here for more US locations

  • Facebook
  • Google+
  • LinkedIn
  • Xing
  • YouTube
  • Twitter