Concept series

Contact

Need more information?
Contact us:

Contact

Concept series hot melt adhesive melters – modular, efficient, and safe

The Concept Diamond, B and C melters for the application of thermoplastic adhesives are modularly designed with different tank sizes, pumps, and numerous optional components. They can support a variety of applications and can be extended at any time. The melters are available with manual or automatic filling, are energy-optimized and safe in their operation. In addition, the melters of the Concept series can be easily integrated in existing systems and are low-maintenance.

All hot melt adhesive melters of the Concept series are based on the same base module. Concept Diamond, B and C differentiate in the configuration and available additional options. Thanks to this modular design, the melters can be optimally tailored to customer requirements and reduce costs .

Advantages of the Concept series – at a glance

  • Modular design for flexibility and reduced costs
  • Selection of 1 to 8 connections for heated hoses and application heads
  • Energy-efficient and safe thanks to CoolTouch insulation
  • Easy operation and maintenance
  • Easy integration
  • Variety of options, such as pattern control, filling level monitoring, volume control, etc.

Modular design and easy integration

Insulated adhesive distributor

Thanks to the modular design, up to 8 heated hoses and application heads can be connected depending on the system (Concept Diamond, B or C). Piston, Gerotor, and gear pumps are offered. Piston pumps are especially suited for intermittent adhesive application (with interruptions), gear and Gerotor pumps are used for continuous adhesive application and precise metering.

The hot melt adhesive melters are easy to install and access thanks to optimized hose routing and a tank lid rotatable by 180° for manual filling. This way, they are suitable for any type of installation. Diverse interfaces and I/O signals are available for integration and communication. Pattern control can be optionally integrated as well.

Efficient in energy consumption and maintenance

All Concept melters are insulated and can save energy due to reduced heat loss. The tank is non-stick coated with FEP (perfluoroethylenepropylene) for ease of cleaning and the individual temperature control prevents adhesive burning. In addition, filters on tank and pump outlet minimize ingress of possible contaminations through the heated hose into the application head, where they could cause nozzle blockage.

Intuitive and safe operation

Intuitive touchscreen

Operation is based on a language-independent control panel (TRM) or a touchscreen (RobaVis). The user-friendly user interface RobaVis with adjustable main screen and visualized presentation enables intuitive, easy operation. The current operating state is always indicated and saved in an event log. Using the additional InfoPlus software on the touchscreen, consumption and operation data can be collected and analyzed, e.g., for preventive maintenance.



Automatic filling (RobaFeed 3)

Safe operation is ensured using CoolTouch insulation of the adhesive distributor, which minimizes the risk of burns. For increased operational safety and efficiency, the melters of the Concept series can be optionally automatically filled using a granulate feeder (RobaFeed 3). Continuous filling with a constant adhesive amount is ensured and the risk of burns caused by opening the tank lid prevented.

Main features

Concept Diamond
  • Tank sizes: 5, 8, 12, 18, and 30 liters
  • Connections for up to 8 application heads and hoses
  • Configurable with piston, gerotor or gear pump
  • Intuitive operation via touchscreen
Concept B
  • Tank sizes: 5, 8, 12, 18, and 30 liters
  • Connections for up to 4 application heads and hoses
  • Configurable with piston or gerotor pump
  • Easy language-independent operation using membrane keyboard (touchscreen optional)
Concept C
  • Tank sizes: 5, 8, and 12
  • Connections for up to 2 application heads and hoses
  • Configurable with piston or gerotor pump
  • Easy language-independent operation using membrane keyboard (touchscreen optional)

Technical data

Concept Diamond

  Diamond 5 Diamond 8 Diamond 12 Diamond 18 Diamond 30
Tank volume 5 l 8 l 12 l 18 l 30 l
Melt rate* 5 kg/h 8 kg/h 12 kg/h 18 kg/h 30 kg/h
Adhesive type Granulate and blocks (thermoplastic)
Operating temperature 20 to 200 °C
Heating time (160 °C)* approx. 30 min.
Adhesive viscosity 100 to 20,000 mPas
Heated hose connections 1 to 8
Filling Manual or automatic (RobaFeed 3)
Number of pumps 1 1 1 or 2 1 or 2 1 or 2
Pump type Piston, Gear or Gerotor pumps
Supply voltage 200 to 240 V, 1-3 LNPE
Electrical power 1.8 kW 3.0 kW 3.0 kW 4.5 kW 6.0 kW
Compressed air supply 6 bar, dry, not oiled acc. to ISO 8573-1 Class 4
Electronics ICS-Net
Control panel Touchscreen (RobaVis)
Pattern control Optional AS-IK 10 or AS-IK 40
Weight 34 kg 41 kg 54 kg 64 kg 95 kg
Safety standard CE, CSA


Concept B

  Concept B5 Concept B8 Concept B12 Concept B18 Concept B30
Tank volume 5 l 8 l 12 l 18 l 30 l
Melt rate* 5 kg/h 8 kg/h 12 kg/h 18 kg/h 30 kg/h
Adhesive type Granulate and blocks (thermoplastic)
Operating temperature 20 to 200 °C
Heating time (160 °C)* approx. 30 min.
Adhesive viscosity 100 to 20,000 mPas
Heated hose connections 1 to 4
Filling Manual or automatic (RobaFeed 3)
Number of pumps 1 1 1 or 2 1 or 2 1 or 2
Pump type Piston or Gerotor pumps
Supply voltage 200 to 400 V, 1-3 LNPE 200 - 400, 3 NLPE
Electrical power 1.8 kW 3.0 kW 3.0 kW 4.5 kW 6.0 kW
Compressed air supply 6 bar, dry, not oiled acc. to ISO 8573-1 Class 4
Electronics CLS
Control panel Membrane keyboard (TRM) or option al touchscreen (RobaVis)
Pattern control Optional AS-IK 10 or AS-IK 40
Weight 34 kg 41 kg 54 kg 64 kg 95 kg
Safety standard CE, CSA


Concept C

  Concept C5 Concept C8 Concept C12
Tank volume 5 l 8 l 12 l
Melt rate* 5 kg/h 8 kg/h 12 kg/h
Adhesive type Granulate and blocks (thermoplastic)
Operating temperature 20 to 200 °C
Heating time (160 °C)* approx. 40 min.
Adhesive viscosity 100 to 20,000 mPas
Heated hose connections 1 to 2
Filling Manual or automatic (RobaFeed 3)
Number of pumps 1 1 1
Pump type Piston or Gerotor pumps
Supply voltage 200 to 240 V, 1-3 LNPE
Electrical power 1.8 kW 3.0 kW 3.0 kW
Compressed air supply 6 bar, dry, not oiled acc. to ISO 8573-1 Class 4
Electronics CLS-C
Control panel Membrane keyboard (TRM) or optional touchscreen (RobaVis)
Pattern control Optional AS-IK 10
Weight 34 kg 41 kg 54 kg
Safety standard CE, CSA

*Depending on adhesive, viscosity, temperature at 230 V AC

Share this product

About Robatech

Robatech with headquarters in Switzerland, is a worldwide leading manufacturer of high-quality application systems for industrial glue application. Our precise adhesive application equipment supports our customers in different industries in the efficient processing of hot melt adhesive and cold glue. As service and technology leader for green adhesive application solutions, we count on sustainability. Our products – manufactured partly using solar energy - are energy- and consumption-optimized and thus reduce environmental pollution. Gluing technology. Global and close. We are present in 70 countries. Our Robatech representation in your country is looking forward to answering any questions you may have regarding your adhesive application.

Robatech Gluing Technology
2 Seax Way, Basildon
UK - Essex SS15 6SW
(Robatech is an authorised trading name of W H Leary Limited)
Phone:
Fax:
E-Mail:
Web:

+44 1268 490 035
+44 1268 494 323
This email address is being protected from spambots. You need JavaScript enabled to view it.
www.robatechGT.com

  • Facebook
  • Google+
  • LinkedIn
  • Xing
  • YouTube
  • Twitter